Sub-Tech Systems Ltd

Single Hose BIB

The Sub-Tech Systems Hyperbaric Chamber BIB Systems has been designed for use in chambers, diving bells and hyperbaric welding environments, however this BIB system is not to be used for diving.

High performance pneumatically balanced lever operated poppet valve regulator, with operator adjustable Venturi assistance by means of a lever operated air flow spoiler mounted co-axially about the valve spindled.

Apart from the operated poppet valve regulator, with operated adjustable Venturi the bib has two other adjustments, lever height adjustment for optimising the lever travel and an adjusting screw for higher supply pressures. This can be used by the service technician to fine tune the regulator to give the optimum breathing performance for a range of supply pressures.

Spec for Single Hose Bib BIB

Type - Diaphragm operated balance regulator, CE Approved to EN 250-2000 and meet the requirements of NORSOK V101.

Supply Pressure - 6 - 12 Bar
(Factory Settings)

Supply Pressure - 12 - 17 Bar
(After Re-Setting)

Oxygen Compatibility - Max 40% as supplied (Requires special cleaning for use with 100% oxygen).

O Rings - EPDM

Spring - Stainless Steel

The BIB has been designed to be easily maintained and serviced, for this reason only a small range of tools are required to service the BIB.