Diving Panels
Sub-Tech manufactures a range of diving panels to be mounted inside dive control containers or tow vans. They are built individually to suit your requirements 1 Diver, 2 Diver or 3 Diver. The photographs show both 2 Diver and 3 Diver panels complete with Sub-Tech manufactured Low Pressure Alarms (alerts the operator if the pressure falls below 100 PSI), Tescom Regulators, PNEUMO Gauges, all tungum pipework and high specification valves etc to comply with a high level of safety. If requested 02 monitoring and gas sampling can be added.
For more information please contact the office on 01229 820400 or email us at sales@subtechsystems.com for more information.
Two Diver PanelThis unit is a portable, self contained, two diver complete dive system. It provides all of the operations necessary to monitor and control the diving operation. The system is a central control point for the supply of breathing air to the divers, monitors the divers depth, provides an audio alarm if the divers air pressure falls below a preset limit, and provides superior communications for two divers and topside personnel.
Easy set-up with high pressure sources or low pressure air which greatly extends search and rescue diving capabilities. To use the new unit with 4500PSIG inlet supply, simply change the yoke assembly with the Model SAA5300, 300 BAR DIN adapter. The communications system can be both full duplex or simplex. The optional Wireless Tender provides the tender or operator with freedom around the dive sight while staying in constant communication with the divers. The case is an extremely strong and durable case constructed of pressure fused fiberglass that provides a convenient, compact, rugged and professional system designed for years of reliable operation.
Air Control
High Pressure Side
High pressure inputs include two colour coded (red and blue) SCUBA bottle yokes with six foot hose whips.
Each input has a 0-5000PSIG gauge and shut off valve to monitor and switch from one high pressure source to the other.
The added safety feature of check valves provide protection against back flow of air from a full tank into an empty when switching HP tanks.
High pressure air is reduced to low pressure via a Tescom regulator with a pre-regulator in-line 50 micron filter. A 0-400PSIG gauge monitors the output pressure. A relief valve (factory set at 285PSIG) prevents over pressurization.
Low Pressure Side
Input check valve permits simple switching to back-up high pressure air in the event of low pressure air failure. Back-up high pressure air supply can simply be turned on. Diver umbilical air connection is an oxygen type fitting, controlled by a quarter turn ball valve which permits unrestricted flow.
Communications
The communicator is powered by two internal rechargeable Gel-cell batteries complete with the Amron external charger and noise cancelling hand-held push-to-talk microphone. The PTT mic eliminates the transfer of all topside noise to the divers and improves communications quality.
System can also be purchased with the FDW Wireless Tender Option - provides the tender complete mobility to move around the dive site and still remain in constant contact with divers.
Also available: Amron Walk & Talk Module - allows the tender to remotely operate unit from up to 25ft. away.
Pneumo System
The heart of the pneumo system is the high precision 6" depth gauge. The gauge dial has a glare free face and is clearly marked for fast, accurate readings.
An air pressure alarm monitors air pressure supplied to the divers and activates an audio alarm alerting the operator of low pressure conditions. The pressure switch is preset at 100PSIG and can be manually adjusted to any pressure between 22.5 and 112PSIG.
3 Diver PanelThe Portable 3-Diver Air Control and Depth Monitoring System is a portable self contained three diver high and low pressure air control and depth monitoring (pneumo) system for surface supplied diving operations. The system is designed to provide a central control point for the supply of breathing air to three divers and monitor their depth. The system is housed in a durable pressure fused fibe glass case which provides a convenient, compact, rugged and professional system.
Depth Monitoring with Cross Connect Capability. Automatic gauge protectors in addition to gauge snubbers protect against over pressurization. The pneumo panel has the ability of cross check all depth gauges. The divers pneumo connection is a O2 type fitting, pneumo valves are regulating type. Pneumo gauges are 6" high precision 0.25% of full-scale accuracy, dual scale 0-250 FSW/0-76 MSW with 1 foot increments.
Low Pressure Alarm Module supplies a loud audio signal to alert the operator when a diver's air pressure falls below a preset limit of 100PSIG.
The optional heating cable is 24 feet long and is wrapped around the HP input and regulator section located on backside of manifold panel. This standard plug connect 120 VAC heater is located on front panel for ease of use. As an added safety feature, a GFCI inline cord set is supplied. The lower case is insulated with closed cell foam to help protect against severe weather conditions.
Features
Two 44-1300 Series Tescom Regulators
Two high pressure and one low pressure air source connections
Convenient switching between high pressure or low pressure
Low pressure audio alarm
50 Micron in-line stainless filter on regulator input
Check valves on all source inputs
Automatic gauge protectors and snubbers protect against over pressurization of precision pneumo gauges
Specifications
Air Control - High Pressure Section
Inlet Connection (2): #6 JIC
Input Pressure Range: 500-5000PSIG
Inlet Valve (2): Source Select
Gauge: 0-6000PSIG Accuracy ±1.5%
Input Filter, Inline Pre-regulator: 50 Micron
Tescom High Pressure Regulators: 2 ea.
Output Pressure Range: 0-300PSIG
Max Pressure: 5000PSIG
Air Control - Low Pressure Section
Inlet Connection: #8 JIC
Check Valve: 2 ea.
Diver Outlet Connection: 3 ea. O2 fittings
Diver Outlet Valve: 3 ea.
Air Pressure Gauge: 3 ea. 0-400PSIG Accuracy ±1.5%
Over-pressure Relief Valve: Set pressure 285PSIG
Depth Monitoring Pneumo
Pneumo Gauge: 3 ea. 6" Dual Scale
Range: Dual Scale 0-250FSW / 0-76MSW
Accuracy: 0.25% of Full Scale w/ 1ft. Divisions
Pneumo Valves (7): Regulating Valve KEL-F Seat
Outlet Connection (3): O2 fitting, brass
Low Pressure Alarm: Pressure Range, 22.5-125PSIG, Factory Set at 100PSIG
Panel Construction
Panel Material: Aluminium, Stainless Steel
Powder Coating: Black textured semi-gloss polyester
Graphics: Yellow & White silkscreened
Case Dimensions
Lid Closed: 25"W x 20"D x 20"H
Lid Open: 25"W x 20"D x 29"H
Weight: 95lbs (approx)